DXX-500 Vacuum Melt Spinner Equipment
Composition
The equipment mainly consists of induction melting vacuum chamber, rotating door, melt spin device, induction melting institutions, manual liner feed institutions, spraying system, working gas circuit, pump system, vacuum measurement, electric control system, installation machine and so on.
Technical Index
| Model | DXX-500 |
| Main Vacuum Chamber | Horizontal cylindrical vacuum chamber, size: Ø500*400mm |
| Configuration of Vacuum System | Mechanical pump, molecular pump, gate valve |
| Ultimate Pressure | ≤6.67*10-5Pa |
| Time of Recovery Vacuum | Reach 5*10-3Pa in 20 mins ( expose in air for short time and inflate dry chlorine and then begin air exhaust) |
| Rotating Rolling Wheels | 1 set roller rotating equipment, line speed of surface: 0-50m/s, frequency control |
| Induction Coil and Quartz Crucible | Induction melting 10g pure iron sample. The heating area of quartz melting crucible: Ø15*50mm |
| Vacuum Spraying Device | Provide standard spraying mold, Ø120*90mm |
| Device Floor Space | Mainframe: 2600*900mm2, electric control cabinet:700*700 (1 set) |
DXX-500 Vacuum Melt Spinner Equipment prepares strips of amorphous materials by adopting the molten state melt spin method and massive amorphous materials by adopting the spraying method. It is suitable for scientific research and small production of new materials for colleges, scientific institutions and enterprises.
