Product Category

Home ꄲ Magnetic Materials ꄲ Magnets Production equipment

DXMM-20C80S Capacitive Magnetizer Machine

DXMM-20C80S Capacitive magnetizer machine can magnetize permanent magnets, speakers, DC motors, DC fans, stepper motors, rubber magnets and magnetic toys.
With cabinet chassis structure, used to optimize circuit design, energy storage capacitors for high voltage oil-immersed power long life capacitor. Rigorous testing means power, Long working life, strict material selection and excellent cost performance.

넶6153 ¥ 0.00
DXP25-300 Bidirectional Magnetic Field Press

The PLC of this magnetic field press uses the OMRON company controller, and all actions are centrally controlled by the PLC.
When the electromagnetic coil passes current, a spatial magnetic field with relatively parallel magnetic lines of force is generated between the two pole heads, thereby achieving the purpose of orienting the magnetic powder.
The oil cylinder is controlled by the hydraulic system to implement actions such as suppression and return.

넶208 ¥ 0.00
DX-MAG Capacitive Pulse Magnetizer

DX-MAG series capacitive pulse magnetizing/demagnetizing machines are composed of high-voltage oil-immersed pulse capacitors, silicon controlled rectifiers and control circuits. The AC power increases the power supply voltage through the isolation transformer, and then is converted into DC by the rectifier to charge the capacitor. The high-voltage direct current energy is stored in the capacitor.

넶165 ¥ 0.00
Magnetizing Coils and Magnetizing Fixtures

Every magnetizing application requires a tailored magnetizing coil or fixture to transform the magnetizer energy into the required magnetic profile of the magnet.

넶144 ¥ 0.00
DXMM-20C20 Pulse Magnetizer

DXMM-20C20 Pulse Magnetizer could magnetize the permanent magnetic materials and components, such as Sm-Co, Nd-Fe-B, Sr-Ba constant magnet, plastic magnet, magnetic tape & Al-Ni-Co, etc. This machine has high production efficiency and could be widely used for production lines.

넶111 ¥ 0.00
DXME Series Magnetizing Source

In order to meet different customer needs, the downwardly expanding strategy we used in the product line, we have developed the DXME series magnetizer. These series magnetizers are more cost-effective, more convenient operation, and easy to use.

넶109 ¥ 0.00
DXP15-250 Unidirectional Magnetic Field Press

The automatic mode action procedure is as follows: (actions in brackets are manual operations)
(The charging mold is placed between the two polar heads with the adjusted spacing, and press the "Cycle" button) → The side cylinder enters the clamping mold → The orientation starts and reaches the maximum → The upper cylinder is pressed down → Maintaining pressure → Demagnetization → The upper cylinder goes up → Side Cylinder retreat → (take the mold).

넶101 ¥ 0.00
DXMM-20C40 Impulse Magnetizer Machine

The Impulse Magnetizer Machine is used for ferrite, aluminum nickel and cobalt, magnetic rubber, NdFeB, rare-earth permanent magnet, such as a variety of sizes and shapes of magnets, and medium, small motor internal and external magnetizing and a lot of specifications speaker magnetizing.

넶100 ¥ 0.00
Bonded Ferrite Magnetizer Machine

DXMM30C10 magnetizer machine is used to magnetize bonded ferrite according to the customer's custom design.

넶93 ¥ 0.00
DXMI Series Fixed Value Magnetization System

DXMI Series Fixed Value Magnetization System:
1. The main structure is made of aluminum alloy profiles.
2. PLC programmable control mode.
3. With a touchscreen interface operating system.
4. Can enter the upper and lower production control parameters, and the measurement results were compared to determine whether or not qualified, and display sound and light alarm.

넶80 ¥ 0.00
DXMG Series Magnetizing Power Supply

1. Built-in famous brand PLC.
2. Digital display of preset voltage and output current.
3. Charge time is adjustable.
4. The capacity of the condenser can be switched and the capacity indication.
5. Various operating modes.
6. The counting function.

넶69 ¥ 0.00