Quality Inspection Report: DXWD-175 Electromagnet with D5 Hole in the 80mm Pole Face

Home  ꄲ  Dexinmag News  ꄲ  Electromagnet  ꄲ  Quality Inspection Report: DXWD-175 Electromagnet with D5 Hole in the 80mm Pole Face

left view of DXWD-175 Electromagnet DXWD-175 Electromagnet with D5 Hole in the 80mm Pole Face the pole face of DXWD-175 Electromagnet

 

DXWD-175 Electromagnet the probe in the air gap magnetic field of DXWD-175 Electromagnet the test software of DXWD-175 Electromagnet

 

Overall Dimensions: 1010mm(L) x 700mm(W) x 875mm(H)

Coil spacing: 120mm

Pole diameter: 175mm

Pole face diameter: 80mm

Air gap range: 0 - 120 mm

Weight: 814kg

 

Performance test report
 Introduction
    1. Test purpose
Through the analysis of the test results, the evaluation of the product performance is obtained;
Evaluate whether the test product meets the technical requirements;
Provide reference data for product design and after-sales service, and provide a strong basis for leaving the factory.
    2. Basic information
 Product Name:
Air gap electromagnet		 Product model: DXWD-175
Test time: Apr.19, 2024
    3. Testing environment
The detection environment is closer to the actual environmental conditions used by the user, including factors such as lead wire length and ambient temperature. The time is selected in the time interval where the fluctuation of the geomagnetic field is small. Before the test, the instruments required for the test were turned on and warmed up in advance and the measurement environment was recorded, as shown in Table 1.
Measurement environment
Environment temperature Product initial temperature Lead length Environmental magnetic field
11.0℃ 11.0℃ 3M 0~30000nT
Table 1 Measurement environment data
 
Magnetic field parameter test
    1. Using the device
DX-F2031 power supply
DX-180 Gauss Meter
    2. Magnetic field measurement
This product uses the following measurement methods:
Fixed-point measurement: measure the magnetic field at the target point
Magnetic field strength
Air Gap Display current (A) Display voltage Voltage (V) Magnetic field
strength（T）
80mm Pole head/20mmGap 10 - 1.752
80mm Pole head/20mmGap 15 - 2.144
80mm Pole head/20mmGap 20 - 2.292
80mm Pole head/30mmGap 10 - 1.221
80mm Pole head/30mmGap 15 - 1.663
80mm Pole head/30mmGap 20 - 1.911
80mm Pole head with D5 Hole/20mmGap 10 - 1.745
80mm Pole head with D5 Hole/20mmGap 15 - 2.123
80mm Pole head with D5 Hole/20mmGap 20 - 2.259
80mm Pole head with D5 Hole/30mmGap 10 - 1.243
80mm Pole head with D5 Hole/30mmGap 15 - 1.672
80mm Pole head with D5 Hole/30mmGap 20 - 1.912
Table 2 Magnetic field strength data
　
Electrical parameter test
    1. Using equipment
Digital multimeter
Impedance analyzer
    2. Test method
The digital instrument with bridge circuit and voltammetry is used for measurement. The measurement results are shown in the table below.
Resistance R measurement
Environment
temperature		 Product temperature Measuring resistance ResistanceR@20℃ ResistanceR@85℃
11.0℃ 11.0℃ 6.860Ω 7.156Ω 9.296Ω
Table 3 Resistance R data
               
    3.Temperature test
This product uses the following measurement methods:
a. Using magnetic field temperature rise measurement: given the limit working time and maximum temperature under the target magnetic field current required by the user.
b. Maximum current temperature rise measurement: Measure the ultimate working time and maximum temperature under the maximum safe current that the product can withstand
c. Measure the data on temperature, time and current of the entire coil. The measurement results are shown in the table below.
Temperature rise test
Current[A] Working time[min] Initial Temp[℃] End Temp[℃]
10 340 6.3 98.1
Current[A] Working time[min] Initial Temp[℃] End Temp[℃]
15 60 12.8 83.5
Current[A] Working time[min] Initial Temp[℃] End Temp[℃]
20 40 8.7 99.2
Table 4 Relationship data between temperature, working time and current
 
Conclusion
The magnetic field and electrical performance of the product meet the requirements of the corresponding technical parameters. The final performance of the product is subject to this document.

 

Customization is available, please let us know your requirements, and we will design a professional plan for you. Thank you!

Dexinmag® • 2024

Get A Quote!